Icom IC-7410 Used 12 Months Warranty LAMCO Barnsley


Visa V12 Finance

Ham Radio Shop Amateur Radio Marine Aviation Two Way Hire Sales CB Radios Scanners Receivers Antenna Tuners Power Suplies D-STAR Yaesu Icom Kenwood Fusion Beam Rotators Amplifiers Used HAM Radio Gear Diamond LDG Comet Uniden Sirio Maldol bhi CRT President Solarcon Spiderbeam Komunica D-Original SPE Prosistel Acom MFJ cross Country Wireless Telecom Two Way Radio Hire Sales Rental DMR Digital

In stock


Icom IC 7410 Used Twelve Months Warranty

LAMCO Barnsley.

Icom IC 7410 HF 50Mhz All Mode 100 Watt Transceiver Used.




Rig Cheques are non-transferable and hold no monetary value. Rig Cheques cannot be exchanged or used after the written expiry date. Rig Cheques are only valid as a discount off the final price. Rig Cheques if purchased are non-refundable. LAM Communications Ltd is not responsible for any loss or damage of the Rig Cheque and will not accept any claim for compensation. Rig Cheques are deemed void if not validated officially by LAM Communications Ltd. Rig Cheques are limited to one voucher per transaction regardless of value. Rig Cheques are issued at the companies discretion. LAM Communications Ltd reserves the right to amend the terms and conditions herein without prior notice.









ICOM IC7410.
Icom proudly announces the debut of the new HF/50MHz transceiver Icom IC 7410.

The IC7410 has been designed as an HF/50MHz specialized rig with excellent performance and features in this category.

The Icom IC 7410 employs high grade DSP unit and double conversion super-heterodyne system developed from the latest technology used in our higher grade rigs such as the IC-7800/7700/7600 series.

In addition, the Icom IC 7410 comes with a built-in 15kHz 1st IF filter and can accept up to two optional filters (3kHz/6kHz).

When used with these 1st IF filters, narrow mode signals such as the CW and SSB modes are protected from adjacent strong signals.

ICOM IC 7410.

Major features.

  • +30dBm 3rd order intercept point (in 14MHz band).
  • ICOM IC7410.
  • Double conversion superheterodyne system improves inband IMD characteristics.
  • 32-bit floating point DSP unit.
  • Built-in 15kHz first IF filter and optional 3kHz and 6kHz first IF filters.
  • Large monochrome LCD display.
  • ICOM IC 7410.
  • ±0.5ppm frequency stability.
  • Built-in simple band scope.
  • Built-in automatic antenna tuner.
  • All mode (SSB/CW/RTTY/AM/FM).
  • Optional RS-BA1 for IP remote control.

Faster DSP unit and in-house DSP expertise.

ICOM IC 7410.

The IC-7410 employs a much higher speed DSP unit compared to the IC-746PRO/7400’s DSP unit.

The AD/DA converter AK4620B allows for a high dynamic range and superior S/N ratio.
Icom has many years of DSP expertise, and has been key in development of the technology.

The IC-7410 represents the latest in digital achievement and performance.

Double-conversion superheterodyne.

ICOM IC  7410.

The Icom IC7410 employs a double conversion superheterodyne system which has an image rejection mixer for the 2nd mixer stage.

When compared to a typical triple-conversion system, signal distortion is dramactically reduced.

+30dBm third-order intercept point (IP3).

Icom’s analog RF circuit experience combined with the latest DSP software technology results in +30dBm IP3 equivalent to the IC-7600. Even in tough RF conditions, such as interference by broadcast stations or strong neighboring ham stations, a weak signal can be clearly received by the IC-7410.
Three first IF filters (3/6/15kHz)*.

ICOM IC  7410.

The IC 7410 comes with a built-in 15kHz 1st IF filter and can accept up to two optional filters (3kHz FL-431 and 6kHz FL-430).

By changing the first IF filter width according to the operating mode, the desired signal is protected from the influence of nearby strong stations.

The 3kHz first IF filter is especially effective in the CW and SSB modes. (Fixed for 15kHz in FM mode).
* in 14MHz.

ICOM IC  7410.

High frequency stability.

A high stability TCXO crystal oscillator provides ±0.5ppm of high frequency stability over a wide temperature range (0°C to +50°C). This allows for a long stable operating time in modes such as RTTY.
Large, multi-function LCD.

The display increases in width from the IC-746PRO/7400.

The large multi-function LCD shows frequency, 9-character channel name, channel number, multi functional meter (includes S-meter, RF output, SWR and ALC level). The dot-matrix portion of the LCD shows the following items:

ICOM IC  7410.

  • Channel name.
  • Band scope.
  • Memory keyer contents.
  • Function key assignment.
  • RTTY decoder screen.
  • Graphical SWR scale.

Simple band scope.

The built-in simple band scope shows the band condition at a glance and is handy for searching for active stations.
RTTY demodulator and decoder.

The built-in RTTY demodulator and decoder allows you to instantly read an RTTY message on the display.

No external units or PC required. The built-in tuning indicator visually helps in critical tuning.
Ample CW functions.

ICOM IC 7410.

All of the following CW capabilities are included in the Icom IC 7410.

  • Large CW PITCH knob and independent BK-IN (break-in) delay knob improve operating efficiency.
  • CW wave form controlled by the DSP.
  • 4 keyer channels with 70 characters of transmit memory per channel.
  • Multi-function electronic keyer with adjustable keying speed from 6-48 wpm, dot-dash ratio from 1:1:2.8 to 1:1:4.5 and paddle polarity
  • Bug keyer and full break-in function.
  • Continuously adjustable CW pitch control from 300-900Hz.
  • Double key jacks (front and rear panels).
  • CW reverse.
  • ICOM IC 7410.

Built-in antenna tuner.

The internal antenna tuner covers from 1.8MHz to 50MHz and automatically tunes for low SWR.

Variable capacitors provide higher accuracy than a typical mechanical relay tuner.

Once you transmit on a frequency, the tuner can instantly retune the frequency using its built-in memory.

USB connector for PC control.

The IC-7410 has a standard type B USB connector and can be connected to a PC.

Modulation input, audio output, RTTY demodulator output and CI-V command can be controlled via the USB cable.

Also, the conventional CI-V remote control jack is built-in to the IC-7410.

Large heat sink.

When compared to the IC-746PRO/7400, the Icom IC-7410 ‘s large heat sink improves heat dissipation.

Even during long hours of heavy-duty cycle operation, the IC-7410 provides stable output power.
Optional RS-BA1 IP remote control software.

ICOM IC 7410.

The optional RS-BA1 allows you to use the Icom IC-7410 from another room using your home network or even from a remote location over the Internet.

 Most settings such as filter width, AGC constant, etc., can be controlled from your PC.

Other outstanding features.

  • Built-in voice synthesizer announces operating frequency, mode and S-meter level.
  • User programmable band edge beep (can be disabled).
  • VSC (Voice Squelch Control) function.
  • RF speech compressor.
  • ICOM IC 7410.
  • Microphone equalizer and adjustable transmit bandwidth.
  • Two preamplifier types: Preamp 1: Increases low level signal improving intermodulation characteristics, Preamp 2: High gain preamplifier.
  • 20dB built-in attenuator.
  • Audio equalizer function.
  • CTCSS and DTCS tone encoder and decoder.
  • Triple band stacking register.
  • Quick split function and frequency lock function.
  • RIT and ΔTx variable up to ±9.999kHz.
  • SSB/CW synchronous tuning automatically shifts the carrier point when switching between CW and LSB/USB modes.
  • 1Hz pitch tuning steps.
  • Program scan, memory scan, select memory scan, mode select scan and Δf scan.
  • Automatic tuning steps.
  • AH-4 control circuit.
  • Large independent MIC/RF power and Notch knobs.
  • ICOM IC 7410.

Rear panel.

  1. Tuner Socket.
  2. DC Power Socket.
  3. Ground Terminal.
  4. Antenna Connectors.
  5. Key Jack.
  6. ALC Input Jack.
  7. Send Control Jack.
  8. Accessory Socket.
  9. CI-V Remote Control Jack.
  10. USB Connector.
  11. External Speaker Jack.

ICOM IC7410.

Amateur Radio Shops HAM Radio Dealer Supplier Retailer LAMCO New/Second Hand Twelve Months Warranty.
Barnsley, South Yorkshire, UK. Amateur Radio Sales.
HAM Radio Sales.
We are Premier Dealers For Icom, Kenwood & Yaesu.
 hamradio-shop is my favourite HAM store! HAM Radio Shop, HAM Radio Shops, Amateur Radio Dealers, Amateur Radio Dealers UK.
Amateur radio Dealers, HAM radio dealers UK.
We are a family business supplying world leading amateur radio equipment.
Icom IC-7410,
Icom IC 7410,
IC 7410,

Additional information

Icom IC 7410

Icom IC 7410 Amateur Radio Shops HAM Radio Dealer Supplier Retailer.
Alt Text LAMCO New/Second Hand Twelve Months Warranty.
Near The Alhambra Shopping Centre.
Barnsley, South Yorkshire, UK.
Amateur Radio Sales. HAM Radio Sales.
We are Premier Dealers For Icom, Kenwood & Yaesu.
hamradio-shop is my favourite HAM store!
HAM Radio Shop, HAM Radio Shops, Amateur Radio Dealers, Amateur Radio Dealers UK.
Amateur radio Dealers, HAM radio dealers UK .
We are a family business supplying world leading amateur radio equipment.
We are small enough to care and large enough to cope!


There are no reviews yet.

Be the first to review “Icom IC-7410 Used 12 Months Warranty LAMCO Barnsley”