MFJ 259 C Antenna Analyser LAMCO Barnsley
MFJ 259 C.
The world’s most popular SWR analyser just got incredibly better and gives you more value than ever!
MFJ 259C gives you a complete picture of your antenna’s performance.
You can read antenna SWR and Complex Impedance 1.8 to 170MHz.
Read Complex Impedance as series resistance and reactance (R+jX) or as magnitude (Z) and phase (degrees).
You can determine velocity factor, coax cable loss in dB, length of coax and distance to a short or open in feet.
You can read SWR, return loss and reflection coefficient at any frequency simultaneously at a single glance.
Also read inductance in uH and capacitance in pF at RF frequencies.
Large easy-to-read two line LCD screen and side-by-side meters clearly display your information.
Built-in frequency counter, Ni-Cad charger circuit, battery saver, low battery warning and smooth reduction drive tuning, much more! Super easy to use! Just set the bandswitch and tune the dial — just like your transceiver.
SWR and Complex Impedance are displayed instantly!
MFJ 259 C
Here’s What You Can Do:
Find your antenna’s true resonantfrequency.
Trim dipols and verticals. Adjust your Yagi, quad, loop and other antennas, change antenna spacing and height and watch SWR, resistance and reactance change instantly.
You’ll know exactly what to do by simply watching the display.
Perfectly tune critical HF mobile antennas in seconds for super DX — without subjecting your transceiver to high SWR.
Measure your antenna’s 2:1 SWR bandwidth on one band, or analyse multiband performance from 1.8 to 170MHz! Check SWR outside the ham bands without violating FCC rules.
Take the guesswork out of building and adjusting matching networks and baluns.
Measure distance in feet to a short or open in faulty coax.
Measure length of a roll of coax, coax loss, velocity factor, impedance.
Measure inductance and capacitance.
Measure resonant frequency and approximate Q of traps, stubs, transmission lines, RF chokes, tuned circuits and baluns.
Adjust your antenna tuner for a perfect 1:1 match qithout creating QRM.
And this is only the beginning! The MFJ-259C is a complete ham radio test station including –frequency counter, RF signal generator, SWR Analyser, RF Resistance and Reactance Analyser, Coax Analyser, Capacitance / Inductance Meter and more!
MFJ 259 C
Take It Anywhere.
Fully portable, take it anywhere — remote sites, up towers, on DX-peditions.
Use 10 AA or Ni-Cad or Ni-MH batteries (not included) or 240 VAC with MFJ-1312DX.
Rugged metal cabinet only 4 x 2 x 63/4 inches.