Sigma SE HF-360 | Fiberglass Vertical Antenna


In stock


Sigma SE HF-360 | Fiberglass Vertical Antenna | LAMCO Barnsley

Sigma SE HF-360 | Fiberglass Vertical Antenna | LAMCO Barnsley

se-hf-360 LAMCO Barnsley HAM Radio Shop Amateur Radio Dealer Supplier Vine Antennas Amateur Radio Shops HAM Radio Dealer Supplier Retailer Second Hand Twelve Months Warranty, Amateur Radio Sales. HAM Radio Sales. HAM Radio Shop, HAM Radio Shops, Amateur Radio Dealers, HAM radio dealers UK. Icom, Kenwood, Yaesu, Hytera. HAM Radio Shops, Amateur Radio Shop, Icom, Hytera, Kenwood, Yaesu, Antennas, Antenna Tuners, Power Supplies, Coax, CB Radio, Scanners, Receivers, Short Wave, Barnsley, UK, Call 01226 361700, Yorkshire The HAM Radio Shop Amateur Radio Dealer Suppliers United Kingdom Two Way Radio Hire Two Way Radio Sales Repair Service Scanners CB Radio Receivers Short Wave RadioThe Sigma Euro-Comm Ltd
HF360 is an end fed vertical antenna, capable of allowing the user to work 80
meters through to 6 meters using an ATU.
The antenna can be pole mounted at ground level or elevated depending on
the user’s personal requirements. The antenna is rated at 400W pep.  The antenna comes with fixings and
installation guide.

How it works: The antenna is
fed using 50 Ohm coax via a SO-239 socket at the base of the unit. A 6:1 UNUN
transformer is located in an IP65 weather sealed box at the bottom of the
bracket section of the fibre glass elements. The antenna comes in four parts,
three  fibreglass poles and one stainless
steel tapered whip. The transformer reduces the impedance at the feed point to
a more acceptable level making the antenna much more efficient and allowing
proper and easy tuning via an external ATU and
automatic ATU’s found in most modern radios.

The antenna can be grounded
if the user experiences excessive local static noise, but as the UNUN is DC grounded:
grounding will not affect the tuning ratios.

The Highlighted bands in the chart below will require a manual ATU, the others an internal ATU.

BAND         ATU    

80 m             1:3.1 (Manual ATU)                                     Specifications

60 m              1:1                                                                   Type End fed vertical

40 m             1:1                                                                   Frequency TX / 3.5 – 52 MHz

30 m             1:1                                                                  RX / 1.8 – 55 MHz

20 m             1:1                                                                   Power handling 400 watts pep

17 m             1:1   (Manual ATU)                                      Impedance 50 Ohms

15 m             1:1                                                                   Connector SO-239

12 m             1:1   (Manual ATU)                                       Length 5.5 meters 18 feet

10 m             1:1

6 m              1:1   (Manual ATU)

Please use a good quality 50 Ohm coax, RG-213 or Mini 8 are probably the best choice.