Spiderbeam 18m Fiberglass Pole LAMCO Barnsley



Out of stock

SKU: Spiderbeam 18m Fiberglass Pole LAMCO Barnsley Categories: , , , Tag:


Spiderbeam 18m Fiberglass Pole LAMCO Barnsley

Ham Radio Shop Amateur Radio Marine Aviation Two Way Hire Sales CB Radios Scanners Receivers Antenna Tuners Power Suplies D-STAR Yaesu Icom Kenwood Fusion Beam Rotators Amplifiers Used HAM Radio Gear Diamond LDG Comet Uniden Sirio Maldol bhi CRT President Solarcon Spiderbeam Komunica D-Original SPE Prosistel Acom MFJ cross Country Wireless Telecom Two Way Radio Hire Sales Rental DMR Digital

Spiderbeam 18m fiberglass pole

Especially developed for successful portable low-band activities on 80 and 160m!

Imagine building a quick portable 80m 4-square array that you can put up within less than one hour…
A single person can easily “walk up” the pole within a few minutes.

high strength professional telescopic fiberglass pole

fully extracted length (height)

18m (60ft)

transportation length
1.70m (5ft 7″)


6.8kg (15lbs)
bottom diameter
73mm (2 5/6″)
top diameter
4mm (1/6″)
wall thickness
1mm – 2mm
(1/25″ – 1/12″)
number of segments
pole material
black fiberglass, UV protected
specially reinforced multilayer winding

Spiderbeam 18m (60ft) fiberglass poles are built very similar to our well proven 12m HD fiberglass poles, yet carefully designed to maintain low weight and perfect balance.
The pole starts out very rugged at the bottom (73mm diameter / 2mm wall thickness) and still has 40mm diameter / 1.5mm wall thickness at 10m height! The upper sections are slim and light (1mm wall thickness), preventing the pole from becoming top-heavy and keeping it perfectly balanced. A special reinforcing winding technique – several layers of fiberglass are wound in alternating direction (criss/cross winding) – provides greatly increased lateral and linear strength

These poles are perfect for building all kinds of wire antennas, especially 80/160m wire GP or inverted L antennas. They can also easily support temporary lightweight 1 Element Quad or Delta loops for 40-10m, and dipoles for all bands, especially when used with open wire feedline. (Most baluns would be somewhat heavy). 4-6 poles could be used to build lightweight beams for 40 or 80m (…who is going to build one for 160? :-)).

The best (and cheapest) wire to use for building such wire antennas (verticals, loops, dipoles etc.) is AWG 18 (= 1mm diameter) enameled copper wire or similar.

Pole installation:
One person can easily “walk up” the pole by pressing the bottom against a rock, tree, car or ground anchor, or having a second person hold it. Once the pole is in vertical position, it can easily be moved around.
Fix the bottom to a ground anchor and attach guy lines at 2 levels. Thin fishing monofilament (1mm diameter).
To complete the installation we strongly recommend using our rubber clamps to safely secure the telescoping elements from slipping down. For a pole of this large size, clamps are a better solution than using tape only.



There are no reviews yet.

Be the first to review “Spiderbeam 18m Fiberglass Pole LAMCO Barnsley”