Yaesu FT-1000MP USED Twelve Months Warranty
Yaesu FT-1000MP HF Transceiver, More than half a decade the FT-1000 has been highly acclaimed by the world’s top DX’ers. Now Yaesu has created a HF masterpiece, building upon proven RF design techniques while introducing a technology to the ham Radio market: Enhanced Digital Signal Processing. With its outstanding receiver section (featuring Collins Mechanical Filters), a clean and versatile transmitter, plus outstanding ergonomics, the FT-1000MP brings a level of HF performance and design excellence to the world’s most demanding hams.
Having long ago broken through the 100 dB receiver dynamic range barrier, Yaesu has now revolutionised the sophisticated area of digital manipulation of signal waveforms through the introduction of Enhanced Digital Signal Processing (EDSP). Through skillful software design and hundreds of hours of on-the-air evaluation, the Yaesu design team has created an impressive array of noise-reduction and interference-rejection filters never before available in the communications industry. Mindful of the critical need to preserve signal-to-noise ratio and IF skirt selectivity throughout the receiver, Yaesu engineers have retained the wide variety of IF filters and high- intercept front end which made the FT-1000D a best-seller Using this RF/IF design as a foundation, and the FT-1000 MP’s EDSP system and Collins Mechanical Filter, the result is a uniquely clean- sounding transmitter, receiver performance second to none, and a total communications package without peer in the ham Radio industry.
Essential for efficient contest and split frequency DX operating, the Dual Receive feature of the FT 1000MP allows the operator to watch both sides of a pile up, or monitor QSOs on two different frequencies and modes within the same band. The Main and Sub VFOs can be placed in the “tracking” mode, allowing efficient diversity operation with a touch of a button. The sub-receiver has its own S meter, too!
RX Frequency Range:
100 kHz ~ 30 MHz
TX Frequency ranges:
160 ~ 10m ham bands only
Emission Modes: LSB, USB, CW, AFSK, FSK, AM, FM
Frequency Steps: 0.625/11.25/2.5/5/10 Hz for SSB, CW, RTTY & Packet; 100 Hz for AM and FM
Antenna Impedance: 50 Ohm Unbalanced
Supply Voltage: 90 ~ 129, 180 ~ 258 VAC, 50/60 Hz and 13.5 VDC
Power Consumption (approx.):
2.4A RX (No Signal) 2.8A RX (signal)
19A TX (100 Watts) (Full Carrier)
Dimensions (WHD): 410 x 135 x 347 mm
Weight (approx.): 15 kg.