LDG AT-1000 Pro2 USED | 12 Months Warranty

LDG AT-1000 Pro2 USED | 12 Months Warranty

LDG AT-1000 Pro2 USED | 12 Months Warranty

 

USED Warranty LAMCO Approved Used Warranty ham radio shop amateur radio dealer

The new AT-1000ProII keeps many of the same features of the previous model, but simplifies the operation.

With the two position antenna switch there are 2,000 memories that store tuning parameters for almost instantaneous memory recall whenever you transmit on or near a frequency you’ve used before. Just key and it tunes!

The AT-1000ProII will operate at any power level between 5 and 1,000 watts peak RF input.

The AT-1000ProII has a large, easy to read bargraph with two selectable scale ranges (100 and 1,000 watts) as well as SWR meter.

The AT-1000ProII will interface with many popular transceivers, enabling their TUNE button to control the AT-1000ProII’s operation.

The AT-1000ProII will tune from 1.8 to 54.0 MHz continuously, and will match an amazing range of antennas, from Yagis and dipoles to inverted-Vs and slopers; virtually any coax-fed antenna from 6 to 1000 ohms impedance (16 – 150 ohms on 6 meters).

Tuning time is usually under 10 seconds.

Longwires or antennas fed with ladder line require an external balun.

Key Features/Specifications:

  • High Power Microprocessor controlled Switched L tuning network
  • Two position antenna switch with 2000 memories for each position
  • Continuous coverage 1.8 to 54 MHz
  • Power rating HF (1.8 to 30 MHz): 1000 Watts Single Side Band 750 Watts CW 500
  • Watts Digital (RTTY, Packet, etc) 6 meters: 250 Watts (any mode)
  • Dual meter scale 100/1000 watts and SWR
  • Tuning power: 5 to 125 watts maximum
  • Relay protection software prevents tuning when RF power is high
  • Optional External 4.5″ analog, LED backlit Meter, 6.7w x 4.0d x 4.0h
  • Includes 6 foot power cable 5.5 x 2.5 mm
  • Enclosure sizes: 10W x 11D x 3H (in inches)
  • Weight: 5.0 pounds

 

LDG FTL Meter Small USED | 12 Months Warranty

LDG FTL Meter Small USED | 12 Months Warranty

LDG FTL Meter Small USED | 12 Months Warranty

 

USED Warranty LAMCO Approved Used Warranty ham radio shop amateur radio dealer

FTL-Meter Receive: S-Meter, Discriminator or Voltage.

Receive: S-Meter, Discriminator or Voltage
Transmit: RF Power, SWR, Modulation, ALC or Voltage
Cable length 3 feet
Sensitive 500 uA meter movement
Externally powered cool blue backlighting
On/Off switch for backlight.
Backlighting requires 11 to 15 volts, 250 mA
Size: 4.5W x 4.0D x 4.5H inches
Weight:1 lb.

 

 

LDG AT-600 Pro2 USED | 12 Months Warranty

LDG AT-600 Pro2 USED | 12 Months Warranty

LDG AT-600 Pro2 USED | 12 Months Warranty

 

USED Warranty LAMCO Approved Used Warranty ham radio shop amateur radio dealer

The LDG AT-600ProII is a general-purpose automatic tuner intended for use with midsize amplifiers with up to 600 watts output on SSB or CW from 1.8 – 54 MHz.

Like most LDG tuners it operates automatically, beginning a tuning cycle whenever the SWR exceeds a preset limit. To protect its circuitry it will not tune at power levels above 150 watts; bypass your amplifier (or place it in Standby) to complete a tuning cycle using only the exciter.

It has a large, easy-to-read bar-graph wattmeter that shows forward and reverses power, as well as an SWR meter.

It features two output connectors so you can easily switch between two antennas. There are 2,000 memory locations for each antenna, allowing nearly instant returning frequencies you’ve used before.

It will tune from 1.8 to 54.0 MHz continuously and will match Yagis, dipoles, inverted Vs, slopers, or virtually any coax-fed antenna from 6 to 1000ohms impedance (16 – 150ohms on 6 meters). Long wires or antennas fed with ladder line require an external balun, not included.

All LDG tuners come with a two-year warranty and LDG’s legendary customer service.

Key Features/Specifications

  • Optional M-600 4.5-inch analogue meter.
  • 4,000 memories for instantaneous band changing
  • Two-position antenna switch with memories for each position
  • Tuning time: 0.5 to 6 seconds full tune, 0.1-second memory tune
  • Tunes 6 to 800-ohm loads (16 to 150 ohms on 6M)
  • Includes DC power cable.
  • Power requirements: 11 to 16 volts DC at 750 mA max during tuning
  • Dimensions: D-10.5xW-8.5xH-2.5inches
  • Weight: 3 lbs

 

 

LDG AT-1000 ProII USED | 12 Months Warranty

LDG AT-1000 ProII USED | 12 Months Warranty

LDG AT-1000 ProII USED | 12 Months Warranty

 

USED Warranty LAMCO Approved Used Warranty ham radio shop amateur radio dealer

The new AT-1000ProII keeps many of the same features of the previous model, but simplifies the operation.

With the two position antenna switch there are 2,000 memories that store tuning parameters for almost instantaneous memory recall whenever you transmit on or near a frequency you’ve used before. Just key and it tunes!

The AT-1000ProII will operate at any power level between 5 and 1,000 watts peak RF input.

The AT-1000ProII has a large, easy to read bargraph with two selectable scale ranges (100 and 1,000 watts) as well as SWR meter.

The AT-1000ProII will interface with many popular transceivers, enabling their TUNE button to control the AT-1000ProII’s operation.

The AT-1000ProII will tune from 1.8 to 54.0 MHz continuously, and will match an amazing range of antennas, from Yagis and dipoles to inverted-Vs and slopers; virtually any coax-fed antenna from 6 to 1000 ohms impedance (16 – 150 ohms on 6 meters).

Tuning time is usually under 10 seconds.

Longwires or antennas fed with ladder line require an external balun.

Key Features/Specifications:

  • High Power Microprocessor controlled Switched L tuning network
  • Two position antenna switch with 2000 memories for each position
  • Continuous coverage 1.8 to 54 MHz
  • Power rating HF (1.8 to 30 MHz): 1000 Watts Single Side Band 750 Watts CW 500
  • Watts Digital (RTTY, Packet, etc) 6 meters: 250 Watts (any mode)
  • Dual meter scale 100/1000 watts and SWR
  • Tuning power: 5 to 125 watts maximum
  • Relay protection software prevents tuning when RF power is high
  • Optional External 4.5″ analog, LED backlit Meter, 6.7w x 4.0d x 4.0h
  • Includes 6 foot power cable 5.5 x 2.5 mm
  • Enclosure sizes: 10W x 11D x 3H (in inches)
  • Weight: 5.0 pounds

 

LDG IT-100 USED | 12 Mths Warranty

LDG IT-100 USED | 12 Mths Warranty

LDG IT-100 USED | 12 Mths Warranty

 

USED Warranty LAMCO Approved Used Warranty ham radio shop amateur radio dealer

LDG IT-100 Automatic ATU, Radios just keep getting better and better. Back in the day, a 6146 backed by a VFO was a big deal. Now, radios are basically computers with an RF stage or two. TheIcom IC-7000 is the latest amazing rig to combine all-band, all-mode DSP operation in a box smaller than some microphones come in, and with a color screen to boot! They got so much right on this fantastic rig, you just have to wonder how they could have gone so wrong with the antenna tuner.

The IT-100 is the ideal tuner for your shinyIC-7000. First, it matches up to 10:1 SWR (4 to 800 ohm loads (16 to 150 on 6M), 4 to 3200 ohms with optional 4:1 Balun), so just about anything you can feed with coax is good to go. And, it has 2,000 (not a typo; that’s 2,000!) memories, enough for every Dxpedition, RTTY spot and radio buddy you’ve got, and then some. Just hit the tune button on the radio, and your IT-100 will set tuner parameters in less than a second if you’ve been there before. If not, it kicks off a full tuning cycle that will be over in about 3 seconds. Don’t need the tuner just now? Then just tap the Tune button briefly, and the tuner goes into bypass. Press it again to bring the tuner back on line — it’s just that simple.

The IT-100 is just 6.5″ long, 6.5″ deep and 1.5″ tall. It weighs only 1.5 pounds, and gets its DC power directly from the radio; no separate power supply needed. The IT-100 works with any Icom radio that supports AH-3 or AH-4 Icom antennas. This currently includes the IC-7000, IC-706MkIIG, IC-718, IC-746 and IC-756ProIII and others.

The IT-100 comes fully assembled, aligned and ready to use. The package includes a 14″ radio interface cable and a 14″ coax jumper; you’re ready to operate right out of the box.

0.1 to 125 watt power range (SSB and CW), 100W on 6M.
2000 memories for instantaneous band changing.
Controlled from Icom Tuner button on radio or Push button on Tuner.
Compatible with any Icom radio that is AH-4 or AH-3 compatible. (6M tuning from Tuner button for radios that are only AH-3 compatible)
Partial radio list: IC-7000, IC-706, IC-718, IC-746 and IC-756.
Tuning time: 0.1 to 6 seconds full tune, 0.1 seconds memory tune.
1.8 to 54.0 MHz coverage. Built-in frequency sensor.
Tunes 4 to 800 ohm loads (16 to 150 on 6M), 4 to 3200 ohms with optional 4:1 Balun.
For Dipoles, Verticals, Vs, Beams or any Coax Fed Antenna.
Optional external Balun allows tuning of random length, long wire or ladder line fed antennas.
Includes Icom interface cable and coax jumper. Ready to use right out of the box.
Small Size Enclosure: 6.5L” x 6.5W” x 1.25H”. Weight: 1.5 pounds.

LDG YT-100 ATU USED | 12 Mths Warranty

LDG YT-100 ATU USED | 12 Mths Warranty

LDG YT-100 ATU USED | 12 Mths Warranty

 

USED Warranty LAMCO Approved Used Warranty ham radio shop amateur radio dealer

LDG YT-100 AUTO ATU FOR FT 857, FT 897 and FT-100-RF Power: 1 to 100 watts SSB, CW and digital modes. Latching relays for ultra low power consumption, Built-in CAT interface for FT-100(D), 857(D) and 897(D) radios. Powered from Yaesu radio over CAT port. CAT thru port for computer control of radio. 4800 baud.2000 memories sorted by frequency.1.8 to 54 MHz coverage (continuous coverage for MARS) Tunes 4 to 800 ohms. (16 to 150 on 6M) SO-239 in and out connections for dipoles, verticals, beams, G5RV, OCF, Cobra, ect. Dimensions: 7.0”L, 7.0”W, 1.5”H.

 

LDG KT-100 USED ‘Kenwood ‘ | 12 Months Warranty

LDG KT-100 USED | 12 Months Warranty

LDG KT-100 USED | 12 Months Warranty

 

USED Warranty LAMCO Approved Used Warranty ham radio shop amateur radio dealer

LDG KT-100 USED | 12 Months Warranty

KT-100 auto tuner for Kenwood radio by ldg electronics, Nothing beats the convenience of a dedicated antenna tuner. Matched to your specific rig, you just press the Tune button on the radio, and the rig and tuner do the rest: reduces power, transmits a carrier, automatically matches the antenna to the rig, then restores power and mode. LDG makes several dedicated tuners using its unique and highly efficient tuning algorithms that will match virtually any coax fed antenna in seconds. Kenwood makes some great radios; here at LDG we love our Kenwoods, but when they stopped producing the AT-300 tuner, they left us high and dry with no dedicated tuner for the entire Kenwood line. So if you have a TS-2000, TS-50 or TS-480 or any Kenwood rig that is AT-300 compatible, you’re just out of luck. Of course, most any LDG tuner will work just fine with a Kenwood rig, but wouldn’t it be great if you could use that Tune button on the radio, which Kenwood orphaned when they deep-sixed the AT-300? LDG’sKT-100 serves as a dedicated tuner for Kenwood radios: just press the Tune button on the radio. The LEDs on the front panel indicate tuning status, and will show a match in seconds, or even less of you’ve tuned on or near that frequency before; the KT-100 has 2,000 memories for instant recall of the tuning parameters for your favorite bands and frequencies. If you have an AT-300 compatible Kenwood radio, you can simply plug the KT-100 into your transceiver with the provided cable; the interface powers the tuner, and the Tune button on the radio begins a tuning cycle. The supplied interface cable makes the KT-100 a dedicated tuner for most modern Kenwood transceivers.

Flexible, low cost, easy to use and just right for your Kenwood transceiver, the KT-100 is the latest in a long line of automatic tuners from LDG that fit in right were you need them the most.

*0.1 to 125 watt power range (SSB and CW), 100W on 6M. *2000 memories for instantaneous band changing. *Controlled from Kenwood Tuner button on radio. Powered from Kenwood radio. *Works with any Kenwood radio that is AT-300 compatible. *Partial radio list: TS-50, TS-480, TS-570, TS-690, TS-850, TS-870, TS-2000. *Tuning time: 0.1 to 6 seconds full tune, 0.1 seconds memory tune. *1.8 to 54.0 MHz coverage. Built-in frequency sensor. *Tunes 4 to 800 ohm loads (16 to 150 on 6M), 16 to 3200 ohms with optional 4:1 Balun. *For Dipoles, Verticals, Vs, Beams or any Coax Fed Antenna. *Optional external Balun allows tuning of random length, long wire or ladder line fed antennas. *Includes Kenwood interface cable. *Small Size Enclosure: 6.5L” x 6.5W” x 1.5H”. *Weight: 2 pounds

LDG AT-1000PROII | Automatic ATU

LDG AT-1000PROII HAM Radio Shop Amateur Radio Dealer Supplier Vine Antennas Amateur Radio Shops HAM Radio Dealer Supplier Retailer Second Hand Twelve Months Warranty, Amateur Radio Sales. HAM Radio Sales. HAM Radio Shop, HAM Radio Shops, Amateur Radio Dealers, HAM radio dealers UK. Icom, Kenwood, Yaesu, Hytera. HAM Radio Shops, Amateur Radio Shop, Icom, Hytera, Kenwood, Yaesu, Antennas, Antenna Tuners, Power Supplies, Coax, CB Radio, Scanners, Receivers, Short Wave, Barnsley, UK, Call 01226 361700, Yorkshire The HAM Radio Shop Amateur Radio Dealer Suppliers United Kingdom Two Way Radio Hire Two Way Radio Sales Repair Service Scanners CB Radio Receivers Short Wave Radio

LDG AT-1000PROII | Automatic ATU

LDG AT-1000PROII HAM Radio Shop Amateur Radio Dealer Supplier Vine Antennas Amateur Radio Shops HAM Radio Dealer Supplier Retailer Second Hand Twelve Months Warranty, Amateur Radio Sales. HAM Radio Sales. HAM Radio Shop, HAM Radio Shops, Amateur Radio Dealers, HAM radio dealers UK. Icom, Kenwood, Yaesu, Hytera. HAM Radio Shops, Amateur Radio Shop, Icom, Hytera, Kenwood, Yaesu, Antennas, Antenna Tuners, Power Supplies, Coax, CB Radio, Scanners, Receivers, Short Wave, Barnsley, UK, Call 01226 361700, Yorkshire The HAM Radio Shop Amateur Radio Dealer Suppliers United Kingdom Two Way Radio Hire Two Way Radio Sales Repair Service Scanners CB Radio Receivers Short Wave Radio

Like most LDG tuners the AT-1000ProII operates automatically, beginning a tuning cycle whenever the SWR exceeds a preset limit. To protect its circuitry, the tuner will not tune at power levels above 150 watts; bypass your amplifier (or place it in Standby) to complete a tuning cycle using only the exciter. The AT-1000ProII also features LDG’s advanced memory tuning, providing 2,000 memory locations; when tuning near a previously used frequency it will recall the settings for nearly instant tuning. It learns your favourite frequencies and bands as you use it. You can also start a tuning cycle manually whenever necessary.

  • Easy to Read Bar Graph,
  • Tune from 1.8 to 54 MHz,
  • Dual Antenna Switch,

The AT-1000ProII has a large, easy-to-read bar-graph wattmeter that shows forward and reverses power with two selectable ranges (100 and 1,000-watt scales) and an SWR meter. The AT-1000ProII will interface with many popular transceivers so you can start a tuning cycle with the radio’s TUNE button. Dedicated control buttons on the tuner allow you to fine-tune capacitance and inductance on those rare occasions when the AT-1000ProII can’t find a perfect match by itself.

The AT-1000ProII features two output connectors so you can easily switch between two antennas. There are 2,000 memory locations for each antenna, allowing nearly instant returning on frequencies you’ve used before.

The AT-1000ProII will tune from 1.8 to 54.0 MHz continuously and will match Yagis, dipoles, inverted-Vs, slopers, or virtually any coax-fed antenna from 6 to 1000 ohms impedance (16 – 150 ohms on 6 meters). Tuning time is normally under 10 seconds; memory tuning time is under 0.2 seconds. Long wires or antennas fed with ladder line require an external balun, not included.

All LDG tuners come with a two-year fully transferable warranty and LDG’s legendary customer service.

Specifications

  • High Power Microprocessor controlled Switched-L tuning network
  • Two-position antenna switch with 2000 memories for each position.
  • The adjustable threshold for Auto mode
  • Continuous coverage 1.8 to 54 MHz
  • Power rating HF (1.8 to 30 MHz):
    • 1000 Watts Single Side Band
    • 750 Watts CW
    • 400 Watts Digital (RTTY, Packet, etc)
  • 6 meters: 250 Watts (any mode)
  • Capacitor / Inductor fine-tune controls
  • Tuning time: 0.2 recall, 10 seconds average, 30 seconds max
  • Tuning impedance: 6 to 1000 Ohms (approximately 10:1 SWR)
    Dual meter scale 100/1000 watts and SWR
  • Tuning power: 5 to 125 watts maximum
  • Relay protection software prevents tuning when RF power is high
  • LED indicators for Ant and Bypass.
  • Optional External 4.5″ analog, LED-backlit Meter, 6.7″ w x 4.0d x 4.0″ h.
  • Includes 6-foot power cable 5.5 x 2.5 mm
  • Power requirements: 11 to 15 volts DC @ 1 Amp (user supplies power source) www.Jameco.com WM1012-760 and 1953663 are compatible power supplies
  • Enclosure sizes: 10W x 11D x 3H (in inches)
  • Weight: 5.0 pounds.

 

LDG AT-1000PROII | Automatic ATU

LDG AT-600 PROII | Automatic Antenna Tuner

LDG AT-600 PRO II HAM Radio Shop Amateur Radio Dealer Supplier Vine Antennas Amateur Radio Shops HAM Radio Dealer Supplier Retailer Second Hand Twelve Months Warranty, Amateur Radio Sales. HAM Radio Sales. HAM Radio Shop, HAM Radio Shops, Amateur Radio Dealers, HAM radio dealers UK. Icom, Kenwood, Yaesu, Hytera. HAM Radio Shops, Amateur Radio Shop, Icom, Hytera, Kenwood, Yaesu, Antennas, Antenna Tuners, Power Supplies, Coax, CB Radio, Scanners, Receivers, Short Wave, Barnsley, UK, Call 01226 361700, Yorkshire The HAM Radio Shop Amateur Radio Dealer Suppliers United Kingdom Two Way Radio Hire Two Way Radio Sales Repair Service Scanners CB Radio Receivers Short Wave Radio HAM Radio Shop Amateur Radio Dealer Supplier Vine Antennas Amateur Radio Shops HAM Radio Dealer Supplier Retailer Second Hand Twelve Months Warranty, Amateur Radio Sales. HAM Radio Sales. HAM Radio Shop, HAM Radio Shops, Amateur Radio Dealers, HAM radio dealers UK. Icom, Kenwood, Yaesu, Hytera. HAM Radio Shops, Amateur Radio Shop, Icom, Hytera, Kenwood, Yaesu, Antennas, Antenna Tuners, Power Supplies, Coax, CB Radio, Scanners, Receivers, Short Wave, Barnsley, UK, Call 01226 361700, Yorkshire The HAM Radio Shop Amateur Radio Dealer Suppliers United Kingdom Two Way Radio Hire Two Way Radio Sales Repair Service Scanners CB Radio Receivers Short Wave Radio

LDG AT-600 PROII | Automatic Antenna Tuner

at-600proii 1 HAM Radio Shop Amateur Radio Dealer Supplier Vine Antennas Amateur Radio Shops HAM Radio Dealer Supplier Retailer Second Hand Twelve Months Warranty, Amateur Radio Sales. HAM Radio Sales. HAM Radio Shop, HAM Radio Shops, Amateur Radio Dealers, HAM radio dealers UK. Icom, Kenwood, Yaesu, Hytera. HAM Radio Shops, Amateur Radio Shop, Icom, Hytera, Kenwood, Yaesu, Antennas, Antenna Tuners, Power Supplies, Coax, CB Radio, Scanners, Receivers, Short Wave, Barnsley, UK, Call 01226 361700, Yorkshire The HAM Radio Shop Amateur Radio Dealer Suppliers United Kingdom Two Way Radio Hire Two Way Radio Sales Repair Service Scanners CB Radio Receivers Short Wave Radio

LDG AT-600 PROII | Automatic Antenna Tuner

The LDG AT-600ProII is a general-purpose automatic tuner intended for use with midsize amplifiers with up to 600 watts output on SSB or CW from 1.8 – 54 MHz.

Like most LDG tuners it operates automatically, beginning a tuning cycle whenever the SWR exceeds a preset limit. To protect its circuitry it will not tune at power levels above 150 watts; bypass your amplifier (or place it in Standby) to complete a tuning cycle using only the exciter.

It has a large, easy-to-read bar-graph wattmeter that shows forward and reverses power, as well as an SWR meter.

It features two output connectors so you can easily switch between two antennas. There are 2,000 memory locations for each antenna, allowing nearly instant returning frequencies you’ve used before.

It will tune from 1.8 to 54.0 MHz continuously and will match Yagis, dipoles, inverted Vs, slopers, or virtually any coax-fed antenna from 6 to 1000ohms impedance (16 – 150ohms on 6 meters). Long wires or antennas fed with ladder line require an external balun, not included.

All LDG tuners come with a two-year warranty and LDG’s legendary customer service.

Key Features/Specifications

  • Optional M-600 4.5-inch analogue meter.
  • 4,000 memories for instantaneous band changing
  • Two-position antenna switch with memories for each position
  • Tuning time: 0.5 to 6 seconds full tune, 0.1-second memory tune
  • Tunes 6 to 800-ohm loads (16 to 150 ohms on 6M)
  • Includes DC power cable.
  • Power requirements: 11 to 16 volts DC at 750 mA max during tuning
  • Dimensions: D-10.5xW-8.5xH-2.5inches
  • Weight: 3 lbs

 

LDG Z-100A | Automatic Antenna Tuner

LDG Z-100A HAM Radio Shop Amateur Radio Dealer Supplier Vine Antennas Amateur Radio Shops HAM Radio Dealer Supplier Retailer Second Hand Twelve Months Warranty, Amateur Radio Sales. HAM Radio Sales. HAM Radio Shop, HAM Radio Shops, Amateur Radio Dealers, HAM radio dealers UK. Icom, Kenwood, Yaesu, Hytera. HAM Radio Shops, Amateur Radio Shop, Icom, Hytera, Kenwood, Yaesu, Antennas, Antenna Tuners, Power Supplies, Coax, CB Radio, Scanners, Receivers, Short Wave, Barnsley, UK, Call 01226 361700, Yorkshire The HAM Radio Shop Amateur Radio Dealer Suppliers United Kingdom Two Way Radio Hire Two Way Radio Sales Repair Service Scanners CB Radio Receivers Short Wave Radio

LDG Z-100A | Automatic Antenna Tuner

LDG Z-100A 2 HAM Radio Shop Amateur Radio Dealer Supplier Vine Antennas Amateur Radio Shops HAM Radio Dealer Supplier Retailer Second Hand Twelve Months Warranty, Amateur Radio Sales. HAM Radio Sales. HAM Radio Shop, HAM Radio Shops, Amateur Radio Dealers, HAM radio dealers UK. Icom, Kenwood, Yaesu, Hytera. HAM Radio Shops, Amateur Radio Shop, Icom, Hytera, Kenwood, Yaesu, Antennas, Antenna Tuners, Power Supplies, Coax, CB Radio, Scanners, Receivers, Short Wave, Barnsley, UK, Call 01226 361700, Yorkshire The HAM Radio Shop Amateur Radio Dealer Suppliers United Kingdom Two Way Radio Hire Two Way Radio Sales Repair Service Scanners CB Radio Receivers Short Wave Radio

 

LDG Z-100A | Automatic Antenna Tuner

The Z-100A features LDG’s famous 10:1 SWR tuning range that matches Dipoles, Verticals, End fed wires, G5RVs or even an Off centre fed Windom.

The Z-100A is supplied with a complete set of interface leads, giving easy integration to all the popular brands of radio. This means plug-and-play operation and installation could not be simpler.

The Z-100A tuner goes anywhere with an HF radio… desktop, portable, parks, islands, or tall summits.

LDG continues to set new standards for auto tuners and accessories in amateur radio service. LDG Electronics is a family-owned and operated company dedicated to bringing innovative, quality products to the amateur market. Our focus is on anticipating and meeting our customer’s needs and providing them with world-class support.

  • 0.1 to 125 Watt SSB/CW, 30W Digital.
  • 2000 memories for instantaneous band changing.
  • Tuning time: 0.1 to 6 seconds full tune, 0.1 seconds memory tune.
  • 1.8 to 54.0 MHz coverage. Built-in frequency sensor.
  • Tunes 4 to 800 ohm loads (16 to 150 on 6M)
  • For Dipoles, Verticals, Vs, Beams or any Coax Fed Antenna.
  • Includes Icom interface cable. Ready to use out of the box.
  • Small Size Enclosure: 6.5″ L x 6.5″ W x 1.25″ H.
  • Weight: 1.5 pounds.

The Z-100A will work with the following radios with the supplied Interface leads

IC-115:  lead  for Yaesu FTDX101, FTDX3000

IC-108:  lead for Yaesu FT100, FT857, FT897, FT-891, FT991A

IC-109:  lead for Yaesu FT450, FT950, FT1200, FTDX10

IC-105: lead for DX77, SR8, SR9

IC-107:  – Elecraft included with Z-100A

IC-100: Lead for most ICOM radios – partial list IC-706, 703, 718, 7000, 7100, 7200, 7300, 7410, 746, 756, 7600, 7610 (and all variants).